By Kevin Ma, Atlantic Machinery Supply Inc. (AMS), Richmond Hill, Ontario. Updated 19 November 2026.
The short answer
- Who: AMS is Bodor Laser’s authorized Canadian dealer. Our service engineers are based in the Greater Toronto Area, factory-trained on Bodor machines and certified for the work they do, and they have installed and supported 200 Bodor machines across Canada since 2015.
- How fast: on-site service within 2 business days in the Greater Toronto Area, 3 business days elsewhere in Ontario and 5 business days in other provinces. Remote diagnostics and 24/7 online support for existing customers start the same day.
- Parts: nozzles, protective lenses, ceramic rings and other common wear parts are stocked in Richmond Hill, Ontario, so routine repairs do not wait on a shipment from overseas.
- Warranty: every machine sold by AMS carries a 5-year warranty, and claims are handled in Canada by AMS together with Bodor Canada, not through Bodor USA.
Call +1 (905) 883-8887 (Monday–Friday 9:00–16:00 Eastern) or use the contact page. Existing customers can also reach us through the online support channel at any hour.
What we service
AMS service and warranty support cover the Bodor and Ragos machines AMS sells:
- Bodor sheet metal fiber lasers: Dream, P, C, A, I, G and H series and the Rocut coil-fed line.
- Bodor tube lasers: T, K, M and M5 series and the Q0 Pro.
- Bodor sheet-tube machines: CT and AT series.
- Bodor automation: iLoader, iLoader Neo, iTrans, iTower, iTransTower and the K, T and M tube loaders and transfers.
- BodorWelder handheld laser welders.
- Ragos CNC press brakes, panel benders and V-grooving machines.
If you own a laser bought elsewhere, contact us: we will tell you honestly what parts and support options we can offer.
The faults we fix most often, and what usually causes them
| Symptom | Usual causes | What AMS does |
|---|---|---|
| Cut quality drifts: dross, burrs, wider kerf, incomplete cuts | Contaminated or cracked protective lens, worn nozzle, focus offset, low gas pressure, dirty ceramic ring | Remote parameter check first; replacement optics from Richmond Hill stock; on-site focus calibration and head alignment |
| Laser source alarm or no beam | Chiller temperature or flow fault, interlock, fiber connector, source fault | Log review through Bodor Plus and the BodorThinker control; chiller service; source diagnosis under the 5-year core-component warranty |
| Head collision or capacitive sensor alarm | Tipped part, worn slats, sensor contamination | Head inspection, sensor recalibration, nozzle and ceramic ring replacement |
| Positioning or repeatability error | Rack and pinion wear or debris, loose coupling, servo or encoder fault, bed out of level | Mechanical inspection, backlash and squareness check, drive diagnosis |
| Chiller faults in winter or summer | Low coolant, wrong antifreeze mix, blocked condenser, ambient temperature outside range | Coolant service, condenser cleaning, advice on shop ventilation and winter settings |
| Tube laser chuck or feeding problems | Chuck jaw wear, centring, pneumatic pressure, loader sensors | Chuck service and recalibration, loader adjustment |
| Software, nesting or network issues | Parameter database changes, updates, network configuration | Remote session; restore of cutting parameter sets |
How a service call works
- Call or message. Have the machine model and serial number, the alarm code or message on the screen, and a photo or short video of the cut or the fault. Most calls are triaged the same day.
- Remote diagnostics. Bodor machines sold by AMS can be read remotely through Bodor Plus; many parameter, software and operator issues are solved without a visit.
- Parts from Ontario. If a lens, nozzle, ceramic ring or other wear part is the cause, it ships from Richmond Hill or comes with the engineer.
- On-site visit. Within 2 business days in the GTA, 3 elsewhere in Ontario, 5 in other provinces. The engineer arrives with the diagnosis already done and the likely parts on the truck.
- Report and prevention. You get a written record of what was found and changed, and a recommendation on maintenance to stop it happening again.
Why local matters for a laser
A fiber laser is a production machine, and a stopped laser stops the brake, the welders and the shipping dock behind it. The difference between a two-day fix and a two-week fix is rarely the skill of the technician; it is where the technician and the parts are. AMS’s engineers live and work in the Greater Toronto Area, parts sit in Richmond Hill, and warranty decisions are made here, not routed through another country. That is also why AMS arranges the ESA field evaluation for every Ontario installation: a machine that was commissioned properly fails less.
Preventive maintenance: the cheaper repair
Most of the faults in the table above are caught by a short routine. Daily: inspect the protective lens and nozzle, check gas pressure and chiller temperature, clear slag from the slats. Weekly: clean the ceramic ring and head, check the dust extractor filter and the compressor drain. Quarterly: rack and pinion cleaning and lubrication, squareness and focus check, chiller coolant test and condenser cleaning. AMS offers scheduled maintenance visits and operator refresher training on request, and a full checklist article is coming next in this series.
Service area
Head office and parts: 97 Newkirk Rd, Unit 3, Richmond Hill, Ontario. On-site service across Ontario, including Toronto, Mississauga, Brampton, Vaughan, Markham, Hamilton, Kitchener–Waterloo, London, Windsor, Barrie and Ottawa, and in every other province on the 5-business-day commitment. See industrial laser machine repair across Canada for provincial pages.
Frequently asked questions
Do you repair fiber lasers that were not bought from AMS?
AMS service and warranty support cover machines sold by AMS. If your machine was bought elsewhere, contact us and we will tell you what parts and support options are available for it.
How quickly can a technician be on site in Toronto?
Within 2 business days anywhere in the Greater Toronto Area, with remote diagnostics starting the same day. Elsewhere in Ontario it is 3 business days, and 5 business days in other provinces.
Do you stock parts in Ontario?
Yes. Nozzles, protective lenses, ceramic rings and other common wear parts for Bodor machines are stocked in Richmond Hill, Ontario.
Is the repair covered by warranty?
Every machine sold by AMS carries a 5-year warranty handled in Canada by AMS together with Bodor Canada. Wear parts and damage from collisions or contamination are normally outside warranty; we tell you before any chargeable work starts.
Can you fix the problem remotely?
Often. Bodor machines sold by AMS can be read remotely through Bodor Plus, and many alarm, parameter and software issues are resolved in a remote session.
What should I have ready when I call?
Machine model and serial number, the alarm code or message, and a photo or short video of the fault or the cut edge. That lets us bring the right parts on the first visit.