RAGOS HM SERIES DUAL SERVO CNC PRESS BRAKES
Ragos HM Series: Dual Servo CNC Press Brakes from 80 to 640 Tons. The HM series is Ragos’s higher-performance dual servo line above the HG single servo range, with bending lengths from 2.5 m to 6.4 m. Supplied and supported in Canada by AMS Inc.
Highlights
- Dual servo drive system
- Thirteen base models from 80 t × 2,500 mm to 640 t × 6,400 mm
- Multiple bending lengths available on most tonnages
- Tooling, controller and axis options available on request
Specifications
| HM-80-2500 | 80 t × 2,500 mm |
|---|---|
| HM-110-2500 | 110 t × 2,500 mm |
| HM-110-3200 / 4000 | 110 t × 3,200 / 4,000 mm |
| HM-130-2500 / 4000 / 5000 | 130 t × 2,500 / 4,000 / 5,000 mm |
| HM-130-3200 | 130 t × 3,200 mm |
| HM-170-3200 | 170 t × 3,200 mm |
| HM-170-4000 / 5000 / 6000 | 170 t × 4,000 / 5,000 / 6,000 mm |
| HM-200-3200 / 4000 / 5000 / 6000 | 200 t × 3,200 – 6,000 mm |
| HM-250-3200 | 250 t × 3,200 mm |
| HM-250-4000 / 5000 / 6000 | 250 t × 4,000 – 6,000 mm |
| HM-320-3200 / 4000 / 5000 / 6000 | 320 t × 3,200 – 6,000 mm |
| HM-400-3200 / 4000 / 5000 / 6000 | 400 t × 3,200 – 6,000 mm |
| HM-640-6400 | 640 t × 6,400 mm |
| Axes, stroke, open height, throat, speeds | Available on request |
Specifications are provided by the manufacturer and may vary by configuration. Contact AMS for a quote or a demonstration.