By Leo Yin, Director, Atlantic Machinery Supply Inc. · Last updated November 16, 2026
Buying a fiber laser cutting machine in Canada comes down to six decisions: how much laser power your thickest regular job needs, which bed size fits your sheet stock, whether you cut sheet, tube or both, how much automation your labour situation justifies, how the machine will be approved for your province, and what it really costs to run. Get those right and the brand and model shortlist almost writes itself.
This guide walks through each decision from the point of view of a Canadian fabricator, sign shop or job shop: the questions to ask, the trade-offs that matter, and the paperwork that catches first-time buyers off guard. Where we use specifications, they come from Bodor’s published data for machines that Atlantic Machinery Supply (AMS) sells and services in Canada.
1. Laser power: size it for your daily work, not your rarest job
Fiber laser sources are sold by output power, from 1.5 kW entry machines up to 30 kW and beyond. More power lets you cut thicker plate and cut thin sheet faster, but it raises the purchase price, the electrical service, the chiller size and the cost of the optics you replace.
A practical way to size it:
- List your top 10 jobs by volume, with material and thickness. Size the source for the thickness you cut every week, not the one plate you cut twice a year; occasional heavy work can go to a plasma table or a subcontractor.
- Check edge quality, not just “max thickness”. A source can pierce and separate thick plate well before it produces a clean, square, production-quality edge. Ask for a cutting chart that shows quality cutting thickness and speed, separately for mild steel, stainless and aluminum.
- Think about assist gas. Higher power makes nitrogen and compressed-air cutting of mild steel practical at greater thicknesses, which removes the oxide layer and can skip a cleaning step before painting or welding. That often matters more to throughput than raw speed.
Because sources, heads and cutting charts change often, the right power for a given material mix is something to confirm with your dealer against real parts. AMS can run cutting samples or share charts for your materials; check with AMS for current power options on each Bodor series.
2. Bed size and machine format
Most Canadian shops buy steel in 4 × 8, 5 × 10 or 6 × 12 ft sheets, so match the working area to the sheet you actually stock. The common formats are named by their size in millimetres:
- 3015 (about 3,048 × 1,524 mm, a 5 × 10 ft sheet). This is the working area of the Bodor P3, C3 and A3, and the most common choice for job shops.
- 4020 and 6025 for 6 × 12 ft or larger sheets, or for nesting several parts per sheet with less scrap.
- Ultra-large format for structural, heavy equipment and shipbuilding work. Bodor’s H Series lists a working area of 12,500 × 3,200 mm, and the G Series goes larger still.
Format also covers how the machine is built. A single-table, open machine (such as the A Series) has the smallest footprint and lowest cost but stops cutting while you load. An exchange-table machine lets operators unload finished parts while the next sheet cuts. A fully enclosed machine (C Series, P Series) contains the beam and fumes, which simplifies laser safety in a shared shop. Before you choose, measure the floor space including the exchange table, chiller, dust collector and a forklift path. Published footprints, for example about 9.4 × 2.2 m for a P3, cover the machine only.
3. Sheet, tube, or both?
If more than about a fifth of your work is round, square or rectangular tube, angle or channel, a dedicated tube laser usually beats sawing, drilling and notching by hand. It cuts copes, slots and bolt holes in one pass and makes fit-up for welding much faster.
- Dedicated tube lasers, for example the Bodor T Series (the T2 handles 8–230 mm tube, with 6.5 m or 9.2 m stock length) or the entry-level K Series. See all of them on our Bodor laser tube machines page.
- Sheet-and-tube combination machines such as the CT Series, which pairs a 3048 × 1524 mm sheet bed with a rotary tube axis. These suit shops with occasional tube work and limited floor space. You give up some tube throughput compared with a dedicated machine.
- Sheet only. This remains the right answer for most sign shops, HVAC and enclosure makers. You can add a tube machine later.
4. Automation: when loaders and towers pay off
Automation turns a laser from a machine that needs an operator at its side into one that keeps cutting through breaks, shift changes and evenings. Options range from a simple automatic loader such as the Bodor iLoader, which feeds sheets to P, B and C Series machines, to material towers that store a full shift of raw sheets and finished parts. On tube machines, bundle loaders feed stock with little handling. The full range is on our automation add-ons page.
Automation tends to pay off when:
- Your parts are thin enough that the machine cuts a sheet faster than one person can load and unload it.
- Skilled operators are hard to hire, which is a common problem in Ontario, Alberta and Quebec.
- You want lights-out or second-shift production without paying a full crew.
- Sheets are heavy enough that manual handling is a safety concern.
If none of these apply yet, buy a machine that can accept automation later, and confirm that the loader you might add fits both the model and your floor plan.
5. Canadian approval, power and installation
This is the part that buyers who import a machine themselves tend to underestimate.
- Electrical approval. Electrical equipment used in Canadian workplaces must be approved, either with a recognized certification mark (CSA, cUL and similar) or through a field evaluation. In Ontario that evaluation goes through the Electrical Safety Authority (ESA). Other provinces have their own process. For Ontario installations, AMS arranges the ESA field evaluation as part of the purchase.
- Power supply. Many Canadian plants run 600 V three-phase, while many imported machines are wired for 380–415 V. Confirm the transformer, its sizing and who supplies it, and budget for an electrician to run the feed to the machine, chiller and compressor.
- Assist gas and air. Plan for oxygen and nitrogen supply (cylinders, a bulk tank or a nitrogen generator) and for clean, dry compressed air if you intend to air-cut.
- Fume extraction and laser safety. Enclosed machines with proper extraction are the simplest route to meeting provincial occupational health and safety requirements.
- Installation and training. Ask exactly what is included: rigging, levelling, commissioning, and how many days of operator and maintenance training.
6. Budget: look at total cost of ownership
The quoted machine price is only part of what you will spend. When you compare quotes, line up:
- The machine, source power and cutting head as configured, quoted in Canadian dollars, with freight, duty and brokerage spelled out
- Chiller, dust collector, transformer, compressor and gas supply
- Installation, ESA or provincial approval, and training
- Consumables such as nozzles, protective windows and ceramic rings, plus electricity and gas per hour
- Warranty length and what it covers, where spare parts are stocked, and how fast a technician can reach you
- Financing or leasing terms
Downtime is the most expensive item on that list. A cheaper machine with parts that come from overseas can cost more in a single lost week than the price difference. Every machine AMS sells carries a 5-year warranty, and spare parts and consumables are stocked in Richmond Hill, Ontario. Since pricing depends on power, format and automation, AMS provides configured quotes in Canadian dollars rather than list prices.
Fiber laser buyer’s checklist
| Decision | What to confirm | Typical Bodor options at AMS |
|---|---|---|
| Laser power | Quality cutting thickness and speed for your top materials; assist gas plan | Multiple source options per series; check with AMS |
| Bed size | Sheet size you stock; floor space including chiller and loading area | 3015 (P3, C3, A3), larger P/C/A formats, H and G ultra-large |
| Machine style | Open vs. enclosed; single vs. exchange table | A (single platform), C (fully enclosed), P (high-speed enclosed), Dream (flagship) |
| Sheet vs. tube | Share of tube and profile work; tube size range and length | T, K, M, M5, Q0 Pro tube lasers; CT and AT sheet-tube machines |
| Automation | Labour, shift pattern, part thickness | iLoader, T-Loader, M-Loader, K-Loader, iTower, iTrans |
| Approval and install | CSA mark or field evaluation; voltage; gas; extraction | ESA field evaluation arranged by AMS in Ontario |
| Support | Warranty, parts stock, service coverage | 5-year warranty; parts in Richmond Hill; service across Canada |
Frequently asked questions
What size fiber laser cutting machine do I need for a small fab shop?
Most small shops start with a 3015 bed (5 × 10 ft sheets) and a mid-range source sized for the mild steel and stainless thickness they cut every week. An enclosed or exchange-table machine is worth it if you plan to run it most of the day.
Do I need a tube laser or can a sheet laser cut tube?
A standard flatbed laser cannot cut tube. If tube and profile work is regular, choose a dedicated tube laser. If it is occasional, a combination sheet-and-tube machine such as the Bodor CT Series covers both in one footprint.
Does a fiber laser need ESA or CSA approval in Ontario?
Yes. Electrical equipment used in Ontario workplaces must carry an accepted certification mark or pass an ESA field evaluation. AMS arranges the ESA field evaluation for machines it installs in Ontario.
How much does a fiber laser cutting machine cost in Canada?
The price depends mainly on laser power, bed size, sheet or tube configuration and automation, plus installation and auxiliary equipment. AMS provides configured quotes in Canadian dollars. Contact us with your materials and thickness range.
Is automation worth it on my first laser?
It is worth it if you cut mostly thin sheet in volume, struggle to staff operators, or want a second shift without a full crew. Otherwise, buy a machine that can accept a loader later.
Who services Bodor fiber lasers in Canada?
Atlantic Machinery Supply in Richmond Hill, Ontario is an authorized Bodor dealer. AMS provides installation, training, parts and warranty service across Canada for the machines it sells.
Talk to AMS about your first, or next, fiber laser
Send us your top parts, materials and thickness range, and we will recommend a configuration and quote it in Canadian dollars, with installation, training and Ontario ESA approval spelled out. Browse Bodor sheet metal laser cutting machines, learn about AMS as Bodor’s Canadian dealer, see our laser machine service and repair, or contact AMS. Call (905) 883-8887. We are based in Richmond Hill, Ontario and serve fabricators across Canada.