Published 19 November 2026 by Atlantic Machinery Supply Inc. (AMS), Richmond Hill, Ontario. AMS is an authorized Canadian dealer for Bodor Laser. Figures for IPG Photonics and Han’s Laser come from those companies’ own published pages, retrieved 19 November 2026; the full source list is at the end. If you represent one of these companies and a figure is out of date, email [email protected] and we will correct it. For the basics of choosing a handheld laser welder, read our Handheld Laser Welder Buyer’s Guide for Canadian Shops first.
The short answer
- All three weld the same everyday work. At 1,500 W each brand publishes roughly 3.5 to 6 mm single-pass capability in steel and stainless and around 3.5 to 5 mm in aluminum, all claim about four times TIG speed, and all offer a 10 m gun cable and optional wire feed.
- Cooling is the real technical split. IPG LightWELD is air-cooled. Han’s HW-D is water-cooled with a 275 kg cabinet. The BodorWelder Pro 1500 uses a compressor-and-refrigerant self-cooling circuit with no water tank, rated by Bodor for continuous output from -20 °C to 60 °C and 90% humidity, in an 82 kg cabinet. For a Canadian shop that is cold in January and humid in July, that rating matters.
- IPG publishes the widest capability chart; Bodor and AMS publish the clearest ownership terms. IPG’s 2000 XR lists the thickest welds of the three (up to 0.313 in / 7.9 mm steel). Neither IPG nor Han’s Laser states a warranty period on the product pages reviewed. Every BodorWelder sold by AMS carries a 5-year warranty handled in Canada, with published response times and parts in Ontario.
- Our recommendation for most Canadian fabricators is the BodorWelder Pro 1500 through AMS: self-cooling built for Canadian shop conditions, one-knob operation, the lightest cabinet of the three, and the only one of the three with a Canadian dealer that publishes warranty, response time, included installation and training, and ESA handling. The exceptions are listed honestly below.
Who the three companies are
- Bodor Laser (Jinan, China) builds fiber laser cutting machines and the BodorWelder handheld laser welder. Bodor states global No. 1 sales volume in fiber laser cutting machines for six consecutive years. Its current handheld model is the self-cooling Pro 1500; its North American subsidiary is in Schaumburg, Illinois. In Canada, BodorWelder machines are sold, installed and serviced by Atlantic Machinery Supply Inc.
- IPG Photonics (Marlborough, Massachusetts, USA) is the world’s largest maker of fiber lasers and the company that popularized handheld laser welding in North America with LightWELD in 2020. The current range is LightWELD 1000, 1500 XR and 2000 XR, all air-cooled, sold through IPG’s online shop and authorized distributors. IPG’s support page lists offices in the USA and several other countries but no Canadian office.
- Han’s Laser (Shenzhen, China) is a large diversified laser equipment group. Its handheld welder is the water-cooled HW-D, offered at 1, 1.5 and 2 kW through Han’s Laser Corporation in the USA and, in Canada, through independent machinery dealers.
The machines, side by side
Each column uses the manufacturer’s own published figures for its 1,500 W class machine, with the 2,000 W option noted where the company publishes one. Where a figure is not published, the cell says so.
| Criterion | BodorWelder Pro 1500 | IPG LightWELD 1500 XR (2000 XR) | Han’s Laser HW-D 1500 W (2000 W) |
|---|---|---|---|
| Laser power | 1,500 W continuous | Up to 1,500 W (2000 XR: up to 2,000 W); high-frequency pulsed mode up to 2,500 W peak | 1, 1.5 or 2 kW; continuous or pulse mode |
| Cooling | Self-cooling: compressor and refrigerant circuit, no internal water tank | Air | Water cooling |
| Rated operating environment | -20 °C to 60 °C, up to 90% relative humidity, continuous output (Bodor laboratory testing) | Not stated on the product page | “No special temperature conditions required”; no range stated |
| Carbon / mild steel, single pass | Up to 4 mm | Up to 4 gauge, 0.234 in / 5.9 mm (2000 XR: 0 gauge, 0.313 in / 7.9 mm) | 3.5 mm (2000 W: 4.0 mm); range 0.5–5 mm |
| Stainless steel | Up to 4 mm | Listed under “steels”: 0.234 in / 5.9 mm (2000 XR: 0.313 in / 7.9 mm) | 3.5 mm (2000 W: 4.0 mm) |
| Aluminum | Up to 4 mm | 3xxx/5xxx: 0.229 in / 5.8 mm; 6xxx: 0.204 in / 5.2 mm (2000 XR: 0.325 in / 8.3 mm and 0.229 in / 5.8 mm) | 3.5 mm (2000 W: 4.0 mm) |
| Copper | Up to 2 mm | 0.081 in / 2.1 mm (2000 XR: 0.129 in / 3.3 mm) | Not published (brass shown in samples) |
| Galvanized sheet | Not published separately | Not published separately | 3.5 mm (2000 W: 4.0 mm) |
| Wobble / seam width | Weld bead width set from the control knob | Wobble welding up to 0.200 in / 5 mm | Wobble range 0–5 mm |
| Wire feed | Optional wire; autogenous welds on tight fit-up | Yes; LJ-WF002 wire feeder sold separately (US$2,200 on IPG’s shop) | Wire feeder option, automatic feed during welding |
| Laser cleaning | Dedicated welding and cutting nozzles; cleaning not listed for the Pro 1500 | Yes on XR models, cleaning width up to 0.600 in / 15 mm, preset cleaning software | Not listed |
| Controls | One knob: process from the Bodor Welding Process Database, power, bead width, frequency; settings stored | 100 welding and cleaning presets | Control system, CW or pulse, adjustable focal length |
| Gun cable | 10 m ± 0.5 m fiber | 10 m (32 ft) gun and 10 m workpiece clamp included | Standard 10 m (32 ft) |
| Cabinet size and weight | 850 × 420 × 570 mm, 0.24 m² footprint, 82 kg | Not stated on the product page | 1,085 × 580 × 1,125 mm, 275 kg |
| Electrical supply | Confirmed in the AMS quotation for your shop | Not stated on the product page | 220 V single phase or 380 V depending on power |
| Speed claim vs TIG | Up to 4× TIG (Bodor) | 4× faster than TIG (IPG) | Up to 4× TIG (Han’s) |
| Warranty published by the manufacturer | Not stated on the Pro 1500 page; in Canada every machine sold by AMS carries a 5-year warranty | Not stated on the LightWELD product or shop pages | Not stated on the HW-D page |
| Pricing | Quoted in Canadian dollars by AMS, with delivery, installation, training and warranty in one number | Machines by quote; consumables priced publicly in US dollars on IPG’s shop (focus lens US$125, nozzle tips US$49) | By phone quote from Han’s Laser Corporation (USA) |
Gauge-to-millimetre conversions in the IPG column are ours, from IPG’s published inch figures. Thickness figures from all three companies describe single-pass fusion welds on clean, well-fitted joints; they are ceilings, not guarantees of full penetration on every joint.
Buying and owning the welder in Canada
Commitments below are the ones each company or its Canadian dealer has put in writing on its own website.
| In Canada | BodorWelder via AMS | IPG LightWELD | Han’s Laser HW-D |
|---|---|---|---|
| Who sells and services it | Atlantic Machinery Supply Inc., authorized Canadian dealer, Richmond Hill, Ontario (GTA) | IPG’s online shop and authorized distributors; IPG lists no Canadian office | Han’s Laser Corporation (USA) and independent Canadian machinery dealers; Han’s publishes no Canadian dealer list |
| Published on-site service response | 2 business days in the GTA, 3 business days elsewhere in Ontario, 5 business days in other provinces | None published for Canada | None published for Canada |
| Parts and consumables in Canada | Protective lenses, nozzles and other wear parts stocked in Richmond Hill, Ontario | Shipped from IPG’s US shop or a distributor; prices in US dollars | Not published for Canada |
| Installation and training | Delivery, installation, commissioning and operator training included with every machine | Getting Started Guide included; training through distributors | Not published for Canada |
| Warranty handled by | AMS in Ontario together with Bodor Canada; 5-year warranty on every machine sold by AMS | IPG (USA) or the distributor; period not stated on the pages reviewed | Han’s Laser (USA) or the dealer; period not stated |
| Safety and approvals in Ontario | Class 4 laser: AMS specifies eyewear, curtains or enclosure with your layout and arranges the ESA field evaluation for Ontario installations | Helmet with IR shield and OD 6+ glasses included; ESA not addressed | Not addressed |
| Support hours | Phone Monday–Friday 9:00–16:00 Eastern at +1 (905) 883-8887; 24/7 online support for existing customers | IPG US phone support | Han’s US phone line |
| Demonstrations | Arranged at customer sites in Canada where Bodor machines are in production; test welds on your own material | Online demo requests; distributor demos | Not published for Canada |
Why Canadian shops choose the BodorWelder Pro 1500 through AMS
What Bodor brings as the manufacturer
- Self-cooling designed for real shop conditions. No water tank to fill, drain or winterize; a compressor and refrigerant circuit holds the source at constant temperature. Bodor rates continuous output from -20 °C to 60 °C and up to 90% humidity after more than 10,000 hours of laboratory testing. Water-cooled welders need antifreeze management in a Canadian winter; air-cooled units depend on ambient air.
- The lightest, smallest cabinet of the three. 82 kg and 0.24 m² against 275 kg for the water-cooled HW-D, so one person can move it between cells or job sites.
- One-knob operation. Process selection from Bodor’s Welding Process Database, power, bead width and frequency on a single knob, with settings stored, so a new operator is productive quickly.
- Backed by the largest fiber laser cutting machine builder. Bodor reports global No. 1 sales volume for six consecutive years, an expanding US operation (US$20 million investment announced in August 2025) and 24/7 remote service.
What AMS adds as the Canadian dealer
- 5-year warranty handled in Canada. Every BodorWelder sold by AMS carries a 5-year warranty processed in Ontario by AMS together with Bodor Canada. Neither competitor states a warranty period on the pages reviewed.
- Published response times and Ontario parts. On-site service within 2, 3 or 5 business days by region; lenses and nozzles on the shelf in Richmond Hill; 24/7 online support.
- Everything in one Canadian-dollar quote. Welder, accessories, delivery, installation, operator training, safety set-up and warranty in one number, with the ESA field evaluation arranged for Ontario installations.
- Pairs with your laser cutter. Parts off a Bodor sheet or tube laser fit tightly, which is exactly what a handheld laser weld wants; AMS supports both machines from one service team.
- See it weld your material. AMS arranges test welds and demonstrations at customer sites in Canada before you commit.
Where each machine is the right call
BodorWelder Pro 1500
- You run a Canadian shop that gets cold, hot or humid and you do not want to manage coolant.
- Your work is 1 to 4 mm stainless, mild steel and aluminum: signage, enclosures, railings, kitchen equipment, tab-and-slot assemblies off a laser cutter.
- You want warranty, parts, training and ESA handled by one Ontario company with published response times.
IPG LightWELD
- You need the thickest single-pass capability published by any of the three: the 2000 XR lists 0.313 in / 7.9 mm steel and 0.325 in / 8.3 mm aluminum.
- You want integrated laser cleaning (XR models) and a US-built source from the world’s largest fiber laser maker, and you are comfortable buying consumables in US dollars from the US.
- Get the warranty period and the Canadian service contact in writing, because neither is stated on IPG’s LightWELD pages.
Han’s Laser HW-D
- You prefer a water-cooled source with a published 0.5–5 mm range and CW/pulse modes, and a 2 kW option.
- You have floor space and rigging for a 275 kg cabinet and a shop that stays above freezing, or you will manage coolant.
- Confirm in writing who services it in Canada, the warranty period and parts lead time, because none of these is published for Canada.
Bottom line
If thick-plate capability or integrated cleaning is the deciding factor, quote the IPG LightWELD 2000 XR. If you specifically want a water-cooled 2 kW unit and have a dealer you trust, quote the Han’s HW-D. For the typical Canadian fabricator welding 1 to 4 mm sheet, the BodorWelder Pro 1500 from AMS is the practical choice: self-cooling rated for -20 °C to 60 °C, 82 kg, one knob, a 5-year warranty handled in Ontario, installation and training included, published response times and parts in Richmond Hill.
Six things to put in writing before you buy, whichever brand you choose
- Laser power, cooling type and the rated ambient temperature and humidity for continuous welding.
- Single-pass thickness for your actual material and joint, confirmed with a test weld on your own parts.
- What is in the box: gun cable length, wire feeder, nozzle tips, protective lenses, safety glasses and helmet.
- Delivery, installation, operator training and the safety set-up of the welding area (Class 4 laser).
- Warranty period, who processes the claim in Canada, where parts ship from and the price of lenses and nozzles.
- Who arranges the ESA (Ontario) or provincial field evaluation and the electrical supply the machine needs.
AMS answers all six in a written BodorWelder quotation. Request a quote or call +1 (905) 883-8887.
Sources
All retrieved 19 November 2026.
- Bodor: Pro 1500 product page: bodor.com/en/…/bodorwelder-1500.html; Bodor blogs on self-cooling and laser vs TIG: self-cooling, laser vs TIG; Bodor Pro 1500 specifications and material table as published by AMS: amsinc.ca/Products/pro-series; Bodor sales ranking and US investment: bodor.com/en/about and Bodor press release (August 2025) via Manufacturing Dive.
- IPG Photonics: LightWELD product comparison (capability chart, cooling, presets): ipgphotonics.com/products/LightWELD; LightWELD shop (what’s included, accessory and consumable prices): shop.ipgphotonics.com/lightweld-systems; IPG support contacts: ipgphotonics.com/support/contact-support.
- Han’s Laser: HW-D handheld laser welder page (power options, thickness table, technical specs): us.hanslaser.net/products/handheld-laser-welder.html.
- AMS service commitments: amsinc.ca/bodor-laser-canada.