Ragos vs Accurl vs Durma: CNC Press Brakes Compared for Canadian Fabricators

Published 19 November 2026 by Atlantic Machinery Supply Inc. (AMS), Richmond Hill, Ontario. AMS is an authorized Canadian dealer for Ragos. Figures for Accurl and Durma come from those companies’ own published pages and catalogues, retrieved 19 November 2026; the full source list is at the end. If you represent one of these companies and a figure is out of date, email [email protected] and we will correct it.

The short answer

  • All three build the same three kinds of machine. Ragos, Accurl and Durma each offer conventional hydraulic or hybrid CNC press brakes for general fabrication, servo-hybrid machines for lower energy use and higher precision, and full electric servo machines for small, fast, oil-free bending. Tonnage ranges overlap from about 25–60 t at the bottom to 400–640 t at the top before tandem or special builds.
  • None of the three manufacturers publishes a whole-machine warranty period. Accurl publishes a 6-month warranty on spare parts and sells paid service and warranty extensions. Ragos and Durma publish no period. In Canada, every Ragos machine sold by AMS carries a 5-year warranty handled in Canada.
  • The Canadian support picture is where they separate. Ragos is sold, installed and serviced in Ontario by AMS, with published on-site response times, Ontario parts stock and included installation and training. Accurl lists its own Canadian office in Calgary, Alberta. Durma’s North American branch is in Michigan and Durma publishes no Canadian office or dealer.
  • Our recommendation for most Canadian shops is a Ragos press brake through AMS: a full hybrid, dual servo and electric line-up, European controller options (Delem, ESA, Cybelec), a 5-year warranty, and the only published Canadian response commitment of the three.

Who the three companies are

  • Ragos (Foshan Ragos NC Equipment Co., Ltd., Foshan, Guangdong, China) builds CNC press brakes, panel benders, folding machines and V-grooving machines. Its press brake lines are the HG (down-acting single servo hybrid), HM (dual servo), MG (up-acting hybrid) and NG (full electric servo) series, offered with Delem, ESA, Cybelec or LT-18 controllers. Ragos exhibited at EuroBLECH 2026 in Hannover (Hall 14, Stand 14-J62). In Canada, Ragos machines are sold, installed and serviced by Atlantic Machinery Supply Inc.
  • Accurl (ACCURL, Ma’anshan, Anhui, China) has built sheet metal machinery since 1988 and describes itself as a top-10 Chinese press brake manufacturer. It publishes nine press brake series from 35 to 6,000 t (tandem) and 0.8 to 24 m, with 2 to 11 axes, plus fiber lasers, panel benders, punches and shears. Accurl sells through its own showrooms in the USA (ACCURL North America, West Jordan, Utah, founded 2016), Germany, the Netherlands, the UK, Australia, Mexico, Malaysia and Israel, and through dealers; its dealer network page lists an ACCURL Canada address in Calgary, Alberta.
  • Durma (Durmazlar Makina Sanayi ve Ticaret A.Ş., Bursa, Türkiye) is a long-established Turkish builder of press brakes, lasers, bending centres, plasma and shears. Its current press brake lines are the PBF (hydraulic), AD-S (hydraulic CNC), AD-Servo (hybrid) and AD-ES (electric) series, with the Durma Cloud production-monitoring platform. Durma opened an official factory branch, Durma North America, in Michigan; as of 19 November 2026 Durma publishes no Canadian office or dealer.

Press brake line-ups, side by side

Each row uses the manufacturer’s own published figures. Where a company does not publish a figure, the cell says so.

Criterion Ragos Accurl Durma
Hydraulic / hybrid CNC line HG series, down-acting single servo hybrid, HG-50 to HG-400 (50–400 t, 1,600–7,000 mm by model) SMART (3–4 axis) and EURO PRO (4–6 axis) hydraulic, 63–600 t, 1,500–6,000 mm, 20 models each PBF hydraulic and AD-S hydraulic CNC; AD-R catalogue range 60–400 t, 1,250–6,050 mm
Servo-hybrid / dual servo line HM series dual servo, 13 models, 80–640 t, 2,500–6,400 mm; MG series up-acting hybrid, MG-1003 to MG-8025 (up to 80 t × 2,500 mm) GENIUS PLUS hybrid servo (6–8 axis) and Super Custom GENIUS, 110–400 t, 2,500–6,000 mm, 16 models; EuroMaster hybrid (ranges on request) AD-Servo hybrid series (ranges not published on the pages reviewed)
Full electric servo line NG series, NG-2508 to NG-8025 (25–80 t, 800–2,500 mm), no hydraulic oil eB Ultra “Eco Bend” electric servo (ranges on request) AD-ES electric, table widths 1,250–2,050 mm (catalogue)
Largest standard machine HM-640-6400, 640 t × 6,400 mm Giant 600–4,000 t, 6–12 m; Tandem 30–3,000 t to 12 m 400 t × 6,050 mm in the AD-R catalogue; larger on request
CNC controller options Delem, ESA, Cybelec or LT-18 Delem on published models; others by configuration Durma’s own DT controllers on PBF; Delem on AD-S per catalogue listings
Frame Welded steel, widened and thickened arch design; tempered, heat-treated, annealed and aged X Series (2026) claims 15% increased rigidity, co-engineered with MicroStep Europe Not stated on the pages reviewed
Other bending machines AG / AGP / AGM panel benders, FG / FGP folding machines, NVA V-grooving machines BEC Smart panel benders, robotic bending cells Bending centres
Factory lead time published About 3 to 45 working days depending on model, configuration and stock (Ragos FAQ) Not published Not published
Warranty published by the manufacturer No period published by Ragos; in Canada every machine sold by AMS carries a 5-year warranty No machine period published; 6-month warranty on original spare parts; paid Sentry service and warranty extensions No period published

For the Ragos models AMS stocks and configures for Canada, see the Ragos press brake page and the Ragos Canada authorized dealer page.

Hydraulic, hybrid or full electric: which drive do you need?

Ragos’s own FAQ puts it plainly: a conventional hydraulic press brake generates force with a hydraulic system; a hybrid press brake keeps the hydraulic ram but adds servo-driven power management so the pump only runs when the ram moves; a full electric press brake uses servo drives for the primary movements and needs no hydraulic oil. All three brands follow that pattern, so the choice is about your parts, not the badge.

  • Heavy plate, long bends, structural and trailer work: a hydraulic or single servo hybrid machine from 170 t up. In the Ragos range that is the HG series (HG-170, HG-220, HG-250, HG-320, HG-400) or the HM dual servo series up to 640 t.
  • General job-shop work in 3 to 6 mm steel at 3 to 4 m: a 110 to 170 t hybrid. Ragos HG-110 and HG-130, or HM-110 and HM-130 when you want dual servo precision.
  • Enclosures, HVAC, electrical boxes, stainless and small precision parts: a full electric servo machine. Ragos NG-2508 (25 t × 800 mm), NG-3512, NG-4015, NG-6020 and NG-8025 cover 800 to 2,500 mm with no oil, low noise and fast cycles.
  • Thin sheet in a compact footprint: an up-acting hybrid such as the Ragos MG-3512, MG-5016, MG-6020 or MG-8025.

Whatever the brand, tonnage must be checked against the full bending length, V-die opening and material grade, not thickness alone; AMS sizes the machine from your part drawings and confirms it in the quotation.

Buying and owning the machine in Canada

Commitments below are the ones each company has put in writing on its own website.

In Canada Ragos via AMS Accurl Durma
Who sells and services it Atlantic Machinery Supply Inc., authorized Canadian dealer, Richmond Hill, Ontario (GTA) ACCURL Canada, Calgary, Alberta (manufacturer’s own office per accurl.com); ACCURL North America, West Jordan, Utah Durma North America, Michigan; no Canadian office or dealer published
Quotes Canadian dollars, configured per machine from your drawings Through Accurl’s Canadian or US office; confirm currency and duty Through the US branch or an importer; confirm currency, duty and brokerage
Published on-site service response 2 business days in the GTA, 3 business days elsewhere in Ontario, 5 business days in other provinces None published for Canada None published for Canada
Parts stocked in Canada Parts and consumables stocked in Richmond Hill, Ontario Not published for Canada; Accurl states spare parts with fast delivery and a 6-month parts warranty Not published for Canada
Installation, tooling and training Delivery, installation, commissioning, tooling and operator training included with every machine Training and technical support listed as services; Canadian scope not published Not published for Canada
Warranty handled by AMS in Ontario; 5-year warranty on every machine sold by AMS Accurl; machine period not published, 6 months on parts, extensions sold separately Durma; period not published
Ontario ESA field evaluation Arranged by AMS for every Ontario installation Not stated Not stated
Support hours Phone Monday–Friday 9:00–16:00 Eastern at +1 (905) 883-8887; 24/7 online support for existing customers Free technical support during office hours; hotline and remote support listed Durma Cloud remote diagnostics for connected machines
Demonstrations Arranged at customer sites in Canada where Ragos machines are in production Showrooms outside Canada listed; Calgary office Not published for Canada

Why Canadian fabricators choose Ragos through AMS

What Ragos brings as the manufacturer

  • A complete bending line-up from one factory. Hybrid HG, dual servo HM to 640 t, up-acting MG, full electric NG, plus panel benders, folding machines and V-grooving machines, so a shop can standardize on one brand from enclosure work to heavy plate.
  • European controllers. Delem, ESA and Cybelec are the controllers most Canadian press brake operators already know, which shortens training and makes used-market resale easier.
  • Heat-treated welded frames. Ragos publishes that its frames are welded steel with a widened and thickened arch, tempered, heat-treated, annealed and aged before machining.
  • Engineering before the quote. Ragos reviews workpiece drawings, material grade, thickness and bend geometry before recommending a model, and publishes a 3 to 45 working-day factory lead time.
  • Active in the market. Ragos exhibited at EuroBLECH 2026 and publishes a technical FAQ on tonnage, crowning, tooling and controller selection.

What AMS adds as the Canadian dealer

  • 5-year warranty, handled in Canada. Every Ragos machine sold by AMS carries a 5-year warranty processed by AMS in Ontario. No manufacturer in this comparison publishes a comparable term.
  • Published response times. On-site service within 2 business days in the GTA, 3 business days elsewhere in Ontario and 5 business days in other provinces, plus 24/7 online support for existing customers.
  • Everything included. Delivery, installation, commissioning, tooling and operator training with every machine, and the ESA field evaluation arranged by AMS in Ontario.
  • Parts in Ontario. Parts and consumables stocked in Richmond Hill, so wear items do not cross a border.
  • Configured from your drawings, quoted in Canadian dollars. AMS sizes tonnage, bed length, axes, crowning, controller and tooling from your parts and puts the whole scope in one Canadian-dollar quotation.
  • A dealer you can drive to. AMS is 100% Canadian-owned, based in the Greater Toronto Area, and arranges demonstrations at customer sites where Ragos machines are in production.

Where each brand is the right call

Ragos

  • You want hybrid, dual servo or full electric with a Delem, ESA or Cybelec controller, and you want warranty, parts, ESA and service to come from one Ontario company with published response times.
  • You are also buying panel bending or V-grooving and want one supplier for the whole bending cell.

Accurl

  • You need a very large or tandem machine: Accurl publishes Giant and Tandem series to 4,000 t and 12 m.
  • You are in Alberta and want to deal with the manufacturer’s own Calgary office; get the machine warranty period and response time in writing, because Accurl publishes only the 6-month parts warranty.

Durma

  • You want a Turkish-built machine with Durma Cloud monitoring and you are comfortable with support from the Michigan branch and cross-border parts.
  • Get the warranty, who services the machine in Canada and who pays for ESA remediation in writing, because none of these is published for Canada.

Bottom line

Accurl is the choice if you need a tandem or 1,000 t-plus machine. Durma is a reasonable choice if you already have a relationship with its US branch. For the great majority of Canadian job shops and OEMs buying a 25 to 640 t press brake, a Ragos machine supplied by AMS gives the best combination available: a full hybrid, dual servo and electric line-up with European controllers, a 5-year warranty handled in Ontario, included installation, tooling and training, published Canadian response times and parts on the shelf in Richmond Hill.

Six things to put in writing before you sign, whichever brand you choose

  1. Exact model, nominal tonnage, bending length, distance between housings, stroke and daylight, and the controller and number of CNC axes.
  2. Crowning system included, backgauge axes, and the tooling (punches, dies, clamping) in the price.
  3. Bend test on your own part and material before acceptance.
  4. Delivery, rigging, installation, commissioning and operator training: what is included and how many days.
  5. Warranty period for the whole machine, who processes the claim in Canada, and where parts ship from.
  6. Who arranges and pays for the ESA (Ontario) or provincial field evaluation and what happens if the inspector requires changes.

AMS answers all six in a written Ragos quotation. Request a quote or call +1 (905) 883-8887.

Sources

All retrieved 19 November 2026.